Inside Our Sampling Room: From Pattern to Approved Sample
A behind-the-scenes look at how patterns are developed, fitted and refined before entering bulk production
Before a single piece goes into bulk production, it has to exist as an approved sample. The sampling room is where an idea becomes something a brand can hold, try on and sign off. Here is how that path works at JTS Garment.
It starts with a pattern
We develop patterns from whatever you bring: a tech pack, a sketch or a physical sample. Precision matters at this stage, because every later step copies the pattern. A small drafting error becomes a fit problem across the whole run.
Fabric and hardware come next
A corset depends on its components as much as on its cut. Fabric, elastic, boning and closures are chosen to suit the product and sourced for the sample, so the sample reflects what bulk production will actually use.
Fit and finishing revisions
The first sample is rarely the last. We check fit on a mannequin, compare it with your comments and adjust the pattern, the construction or the finishing. How many rounds a product needs depends on the product and on how clear the brief is.
Final sample sign-off
When the sample matches your brief, you approve it. That approved piece becomes the reference for production. Our sample makers and our bulk sewing lines follow the same quality standards, so the sample is a fair preview of what you will receive.
How to get more from a sampling round
- Send a clear brief: target size range, fabric preference and the closure type you want.
- Give fit comments as measurements and photos, not only descriptions.
- Collect all comments from your team before sending them, so each round answers every question at once.
Planning a new style? Share your tech pack, sketch or reference product and we will tell you how we would sample it.
Sebelum satu potongan pun masuk produksi massal, ia harus lebih dulu ada sebagai sampel yang disetujui. Ruang sampel adalah tempat sebuah ide menjadi sesuatu yang bisa dipegang, dicoba, dan disetujui oleh merek. Beginilah alurnya di JTS Garment.
Dimulai dari pola
Kami membuat pola dari apa pun yang Anda bawa: tech pack, sketsa, atau sampel fisik. Ketelitian penting di tahap ini karena setiap langkah berikutnya menyalin pola. Kesalahan kecil di gambar pola menjadi masalah ukuran di seluruh produksi.
Lalu kain dan perlengkapan
Korset bergantung pada komponennya sama besar dengan potongannya. Kain, elastis, tulang, dan pengait dipilih sesuai produk dan dicari untuk sampel, sehingga sampel mencerminkan bahan yang benar-benar dipakai saat produksi massal.
Revisi ukuran dan finishing
Sampel pertama jarang menjadi yang terakhir. Kami memeriksa ukuran pada manekin, membandingkannya dengan komentar Anda, lalu menyesuaikan pola, konstruksi, atau finishing. Berapa putaran yang dibutuhkan tergantung produknya dan seberapa jelas brief Anda.
Persetujuan sampel akhir
Ketika sampel sesuai brief, Anda menyetujuinya. Potongan yang disetujui itu menjadi acuan produksi. Pembuat sampel dan lini jahit produksi kami mengikuti standar mutu yang sama, jadi sampel adalah gambaran yang jujur tentang apa yang akan Anda terima.
Cara mendapat hasil lebih baik dari satu putaran sampel
- Kirim brief yang jelas: rentang ukuran, pilihan kain, dan jenis pengait yang diinginkan.
- Sampaikan komentar ukuran dalam bentuk angka dan foto, bukan hanya deskripsi.
- Kumpulkan semua komentar tim Anda sebelum mengirim, supaya setiap putaran menjawab semua pertanyaan sekaligus.
Sedang merencanakan model baru? Kirimkan tech pack, sketsa, atau produk acuan Anda, dan kami akan menjelaskan bagaimana kami akan membuat sampelnya.